IntroductionFormula:Epoxy resin (100%) 43% + benzyl alcohol 5% + CaCo3/43% + green pigment 4% +
Correo electrónico: info@standard-groups.com
Formula:
Epoxy resin (100%) 43% + benzyl alcohol 5% + CaCo3/43% + green pigment 4% + additives 5%
Oil-based construction additives
| Category | Details |
|---|---|
| Product Type | High-performance industrial/commercial flooring system |
| Chemical Base | 100% solids epoxy resin + polyamine hardener |
| Key Applications | – Warehouses: Heavy traffic areas – Food Processing: Chemical resistant zones – Parking Decks: Abrasion-prone surfaces |
| Core Features | – Zero VOC: Environmentally compliant – Chemical Resistance: Withstands acids, oils, solvents – Thermal Shock Stability: -40°C to +120°C |
| Technical Data | – Pot Life: 30-45 mins @ 25°C – Cure Time: 24h walkable, 72h full cure – Abrasion Loss: <0.02g/1000 cycles (ASTM D4060) – Film Thickness: 150-300μm/coat |
| Performance | – Compression Strength: >80MPa – Adhesion: >2.5MPa (concrete failure) – Gloss: Semi-gloss (60°: 30-50 units) |
| Aplicación | – Mixing Ratio: 2:1 by weight – Tools: Squeegee, roller – Substrate Prep: Shot blasting (Sa2.5) required |
| Safety | – Skin Contact: Immediate wash with soap – Eye Contact: Flush with water 15 mins – PPE: Full body suit, chemical goggles |
| Regulatory | Complies with LEED v4, REACH, FDA food contact regulations |
✔ 100% solids content for maximum durability
✔ Ultra-low VOC emission (<50g/L)
✔ Superior chemical and abrasion resistance
✔ Rapid cure time for minimal downtime
✔ Seamless, hygienic surface easy to clean
| Parameter | Component A | Component B | Mixed System |
|---|---|---|---|
| Base Material | Bisphenol-A epoxy | Modified polyamine | Crosslinked polymer |
| Solids Content | 100% | 100% | 100% |
| Viscosity (25°C) | 12.000-15.000 mPa·s | 800-1.200 mPa·s | 9.000-11.000 mPa·s |
| Mixing Ratio | – | – | 4:1 (A:B) by volume |
| Pot Life (25°C) | – | – | 40-60 minutes |
| Property | Test Method | Performance Data |
|---|---|---|
| Adhesion (pull-off) | ASTM D4541 | ≥5 MPa (concrete substrate) |
| Abrasion Resistance | ASTM D4060 | ≤50mg/1000 cycles |
| Chemical Resistance* | ASTM D1308 | Excellent (24h exposure) |
| Compressive Strength | ASTM D695 | ≥65 MPa |
| Cure Time (walk-on) | – | 12-16 hours |
| Full Cure | – | 7 days |
Resistant to acids (10%), alkalis (20%), oils, and most solvents
Application Guidelines
| Application Area | DFT per coat | Recommended Coats | Special Requirements |
|---|---|---|---|
| Light industrial | 0.3-0.5mm | 2 coats | Standard application |
| Heavy industrial | 0.5-0.8mm | 2-3 coats | Aggregate broadcast for wear |
| Food processing | 0.5-0.7mm | 2 coats + topcoat | NSF-approved formulation |
| Parking garages | 0.4-0.6mm | 2 coats | Anti-slip additives recommended |
| Clean rooms | 0.3-0.4mm | 2 coats | Conductive option available |
Descargo de responsabilidad: El contenido anterior es para referencia y comunicación solo entre expertos de la industria, y no garantiza su exactitud o integridad. De acuerdo con las leyes y reglamentos relevantes y los reglamentos de este sitio web, las unidades o individuos que compren artículos relacionados deben obtener cualificaciones y condiciones de cualificación válidas.
Teléfono de la empresa
+86-21-6420 0566
Horas de trabajo
De lunes a viernes
Teléfono móvil:
13816217984
Correo electrónico:
info@qinsun-lab.com
