121-86-8 - Names and IdentifiersName2-Chloro-4-nitrotolueneSynonymsNSC 60111HSDB 5592BRN 181792
Correo electrónico: info@standard-groups.com
| Nombre | 2-Chloro-4-nitrotoluene |
| Sinónimos | NSC 60111 HSDB 5592 BRN 1817924 o-Chloro-p-nitrotoluol 2-Chloro-4-nitrotoluen P-NITRO-O-CHLOROTOLUENE 2-chloro-4-nitro-toluen 2-CHLORO-4-NITROTOLUENE 2-Chloro-4-nitrotoluene Toluene, 2-chloro-4-nitro- 3-Chloro-4-methylnitrobenzene 2-Chloro-4-nitrotoluen [Czech] 2-Chloro-1-methyl-4-nitrobenzene 2-Chloro-4-nitro-1-methylbenzene 2-CHLORO-1-METHYL-4-NITROBENZENE 3-chloro-4-methylnitrobenzene[qr] 2-chloro-4-nitrotoluen(czech)[qr] Benzene,2-chloro-1-methyl-4-nitro- Benzene, 2-chloro-1-methyl-4-nitro- Benzene, 1-chloro-2-methyl-5-nitro- (9CI) 4-05-00-00855 (Beilstein Handbook Reference) |
| CAS | 121-86-8 |
| EINECS | 204-501-7 |
| InChI | InChI=1/C7H6ClNO2/c1-5-2-3-6(9(10)11)4-7(5)8/h2-4H,1H3 |
| Fórmula Molecular | C7H6ClNO2 |
| Masa Molar | 171.58 |
| Densidad | 1.3246 (rough estimate) |
| Punto de fusión | 61 °C |
| punto Boling | 260 °C |
| Punto Flash | 150 °C |
| Disolución del agua | 49 mg/L (20 ºC) |
| Solubilidad | acetonitrile: soluble |
| Presión de vapor | 0.0243mmHg at 25°C |
| Apariencia | Yellow powder or crystal |
| color | Pale Yellow |
| BRN | 1817924 |
| Condición de almacenamiento | Sellado en seco, temperatura ambiente |
| Índice de refracción | 1.5470 (estimate) |
| MDL | MFCD00007210 |
| Propiedades físicas y químicas | This product is light yellow solid, bitter almond flavor, m.p.55 ~ 56 ℃, relative density of 1.28, soluble in benzene, toluene and other solvents, difficult to dissolve in water. |
| Uso | Used as a raw material for medicine |
| Códigos de riesgo | R22 - Dañino si se traga R36 / 37 / 38 - irrita los ojos, el sistema respiratorio y la piel. R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. R52/53 - Dañino para los organismos acuáticos, puede causar efectos adversos a largo plazo en el medio acuático. |
| Descripción de seguridad | S36/37/39 Usar ropa de protección adecuada, guantes y protección ocular/facial. S26 En caso de contacto con los ojos, enjuagar inmediatamente con mucha agua y buscar asesoramiento médico. S61 Evitar la liberación al medio ambiente. Consulte las instrucciones especiales / hojas de datos de seguridad. |
| UN IDs | UN 3457 6.1/PG 3 |
| WGK Alemania | 2 |
| RTECS | XS9100000 |
| TSCA | Yes |
| Número de aranceles | 29049090 |
| Clase de peligro | 6.1 |
| Packing Group | III |
| Uso | 3-chloro-4-methylnitrobenzene is an intermediate of the herbicide chlorotoluron. Organic synthesis intermediates. Used to produce green tamarone. Used as a raw material for medicine |
| Production method | It is obtained by chlorination of p-nitrotoluene. First, add dry pure p-nitrotoluene to the acid-resistant ceramic three-mouth bottle, heat it to 55 ℃ in an external water bath, then add a small amount of iodine and iron filings, and enter chlorine at 50-60 ℃. After a few hours, the chlorine absorption will stop when the theoretical amount is reached. At this time, reactants are precipitated in the bottle, and the reactants are heated by steam to melt and then extracted, and washed twice with 5% dilute hydrochloric acid. Then wash once with 1% sodium carbonate solution, and finally wash once with hot water, stir the oil into cold water to form granules, filter, wash with cold water, and blow dry at 40 ℃ to obtain the finished product. In industrial production, the operation process can be carried out in a dry reaction pot. The molten nitrotoluene is put into the reaction pot, iron wire and iodine tablets (or ferric chloride) are added, and an equal molar amount of chlorine is introduced at 58-62 ℃. After being washed with hot water and neutralized with sodium carbonate, it is poured into ice water, stirred to precipitate crystals, filtered, and dried in the shade to obtain the finished product. the preparation method is to add p-nitrotoluene into the reaction kettle, then add the catalyst anhydrous ferric chloride and iodine, under stirring, raise the temperature of the reaction material to 55~70 ℃, pass chlorine gas for reaction, take samples and track and analyze by gas chromatography, reach the end point, stop passing chlorine gas, keep the temperature for 1h, then wash with water, let it stand and delaminate to obtain 3-chloro -4-methylnitrobenzene, and crystallize to obtain the finished product. |
| category | toxic substances |
| toxicity classification | poisoning |
| acute toxicity | oral-rat LD50: 3020 mg/kg |
| stimulation data | skin-rabbit 500 mg/24 hours mild; Eyes-rabbit 500 mg/24 hours mild |
| flammability hazard characteristics | combustible, decomposition of toxic chlorides during combustion, nitrogen oxide gas |
| storage and transportation characteristics | warehouse ventilation and low temperature drying; Separate storage and transportation from food raw materials and oxidants |
| fire extinguishing agent | carbon dioxide, sand, foam |
Descargo de responsabilidad: El contenido anterior es para referencia y comunicación solo entre expertos de la industria, y no garantiza su exactitud o integridad. De acuerdo con las leyes y reglamentos relevantes y los reglamentos de este sitio web, las unidades o individuos que compren artículos relacionados deben obtener cualificaciones y condiciones de cualificación válidas.
Teléfono de la empresa
+86-21-6420 0566
Horas de trabajo
De lunes a viernes
Teléfono móvil:
13816217984
Correo electrónico:
info@qinsun-lab.com
